DigiSpec DTT-PRO Instrukcje obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcje obsługi dla Sprzęt nagrywający DigiSpec DTT-PRO. DigiSpec DTT-PRO 16 stron. Digital date / time titler

PROGRAMMING

EXIT

Move the cursor by pressing the "Up" or "Down" buttons to the "EXIT" and press the "Select" button to go

back to the "MAIN MENU"

TITLER

TIME-DATE

VL OUTPUT

GRAYSCALE

BORDER

EXIT

When the video goes missing from the DTT-Pro, a red warning background (along with the "VL OUTPUT" setting page 11)

will be displayed with the message flashing "VIDEO LOSS" in large characters. The Date and Time when the video went

missing will also be inserted under the "VIDEO LOSS" message. This will warn an operator of the video loss condition

and give the time and date of this occurrence. If the video is recorded to tape, the date and time will provide when the video

loss had occurred.

Press the "UP" or "Down" button to move up or down the Video Loss message, Title and Date-Time display on the

screen.

Press "Select" button for going to the Programming mode

NOTE :

The Video Loss Message, Title and Date-Time can be set to ON or OFF. Please refer to page 11 and 12.

DOING A MASTER RESET CLEARS ALL PROGRAMMING AND

Power down DTT-Pro by taking out the power line. Then press and hold the "Up" button and plug in the power. Hold the

"Up" button until the Copyright and Version display appear on the screen.

The internal rechargeable NiMH battery needs a full 24 Hr charge if fully discharged to be fully charged and hold memory

backup for 8 weeks.

DISPLAY

RED

THE DTT-Pro DEFAULTS TO THE FACTORY SETTINGS.

DTT-Pro (DATE/TIME TITLER)

VIDEO LOSS

DTT AVE

NTSC

JAN-01-10 8:00:00 A

WARNING!

MAIN MENU

TITLER SETUP

TIME - DATE

DISPLAY

EXIT