Digital Aquatics ReefKeeper Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digital Aquatics ReefKeeper. Digital Aquatics ReefKeeper 18 pagina's.
Pagina afdrukkenThis section gives you a brief overview of the components of your ReefKeeper.
Remote Display
•
Eight LEDs along the bottom of the face plate correspond to the eight available channels on the power
controller, indicating which channels are currently turned on.
•
Three buttons along the right allow you to configure your ReefKeeper as well as enter Feed Mode and view the
night/day mode status.
•
The remote display receives its power via the cable connected to the power controller. In the event of a power
failure, a built-in battery allows the clock and settings to be preserved.
Power Controller
•
The power controller looks like a power strip and plugs into a 3 prong wall socket.
•
Each of the eight channels can be configured to run any of the ReefKeeper functions.
•
Each channel can handle no more than 6 Amps; the entire unit can handle no more than 15 Amps.
Temperature Probe
•
The temperature probe plugs into the power controller via the 6 pin connector located on the side of the box.
•
Once calibrated, the probe is accurate to +/- 0.2 degrees Fahrenheit.
6/28/2005
www.DigitalAquatics.com
PRODUCT INFORMATION
5