Digital Aquatics ReefKeeper Kullanıcı Kılavuzu - Sayfa 5

Evcil Hayvan Bakım Ürünü Digital Aquatics ReefKeeper için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digital Aquatics ReefKeeper 18 sayfaları.

This section gives you a brief overview of the components of your ReefKeeper.

Remote Display

Eight LEDs along the bottom of the face plate correspond to the eight available channels on the power
controller, indicating which channels are currently turned on.
Three buttons along the right allow you to configure your ReefKeeper as well as enter Feed Mode and view the
night/day mode status.
The remote display receives its power via the cable connected to the power controller. In the event of a power
failure, a built-in battery allows the clock and settings to be preserved.

Power Controller

The power controller looks like a power strip and plugs into a 3 prong wall socket.
Each of the eight channels can be configured to run any of the ReefKeeper functions.
Each channel can handle no more than 6 Amps; the entire unit can handle no more than 15 Amps.

Temperature Probe

The temperature probe plugs into the power controller via the 6 pin connector located on the side of the box.
Once calibrated, the probe is accurate to +/- 0.2 degrees Fahrenheit.
6/28/2005
www.DigitalAquatics.com

PRODUCT INFORMATION

5