Shimano BR-M6000 Dealerhandleiding - Pagina 19
Blader online of download pdf Dealerhandleiding voor {categorie_naam} Shimano BR-M6000. Shimano BR-M6000 39 pagina's. Hydraulic disc brake
Ook voor Shimano BR-M6000: Dealerhandleiding (39 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
3
4
Once there are no more air bubbles mixed in with the oil, temporarily close the bleed nipple.
To be continued on next page
Set a 7mm socket wrench in place, fill
the syringe with oil, connect a tube to
the bleed nipple, and then loosen the
(A)
bleed nipple by 1/8 of a turn to open it.
Push the piston of the syringe to add oil.
The oil will start coming out from the oil
(B)
funnel.
Continue adding oil until there are no
more air bubbles in the oil that is coming
out.
19
(A)
Bleed nipple
(B)
7mm socket wrench
NOTE
Secure the brake caliper in a vise to prevent
the tube from being accidentally
disconnected.
Do not depress and release the lever
repeatedly.
Oil without air bubbles may come out as a
result of such operation, but air bubbles may
remain in the oil inside the brake caliper, and
it will take longer to bleed the air. (If you
have depressed and released the lever
repeatedly, drain out all of the oil and then
add oil again.)