Shimano BR-M6000 Dealerhandleiding - Pagina 32
Blader online of download pdf Dealerhandleiding voor {categorie_naam} Shimano BR-M6000. Shimano BR-M6000 39 pagina's. Hydraulic disc brake
Ook voor Shimano BR-M6000: Dealerhandleiding (39 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Replacing the brake hose
Caliper side (BR-M7000/BL-M7000)
(A)
(B)
(D)
1
After checking that both O-rings are
fitted in the top groove and bottom
groove of the banjo, secure the banjo to
the caliper as shown in the illustration.
At this point, check that the O-rings are
in the grooves.
The O-rings are greased.
(C)
32
(A)
Brake hose
(B)
Banjo
(C)
O-ring
(D)
4mm hexagon wrench
Tightening torque
8 - 10 N·m
NOTE
Do not let the brake hose become twisted
when installing it.
Make sure that the calipers and brake levers
are in the positions shown in the illustrations.