Digital Electronics FP790-T21 Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digital Electronics FP790-T21. Digital Electronics FP790-T21 17 pagina's. Flat panel display

Pagina afdrukken

FP External Features

Front

View

Rear

View

H G F

Bottom

View

• Prior to attaching peripheral units to the FP, be sure the FP unit's

power cord is disconnected from the main power supply.

• To prevent an electrical shock, be sure to disconnect the FP unit's

power cord from the power supply before connecting the cord's power

terminals or any peripheral devices to the FP.

A, B

- 4 -

A: TFT type color LCD

The FP units' output display. Data

from the host are displayed.

B: Touch panel

Used to switch screens and write data

to the host.

C: Power input terminal block

Used to connect the power supply

cable.

D: Status LED (Under development)

E: Setup switches (DIP switches)

Used to set the FP's operation mode.

F: MOUSE Connector (MOUSE IN)

Used to connect a mouse.

G: MOUSE Host connector (MOUSE

OUT)

Sends mouse output data from the FP.

Connects to the Host's PS\2 equivalent

Mouse input connector.

H: Serial I/F Connector (RS-232C)

Serial RS-232C interface. This

connects a serial cable to the FP, and

sends FP touch panel data to the Host,

and Host commands to the FP.

I: Analog RGB I/F connector

Analog RGB interface connector

J: Front Maintenance Cover (unused)