Digital Electronics Corporation PL-3700T Series Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digital Electronics Corporation PL-3700T Series. Digital Electronics Corporation PL-3700T Series 17 pagina's.

Pagina afdrukken
Name
F DVI-I interface (DVI-I)
Ethernet interface
G
(LAN1)
Ethernet interface
H
(LAN2)
I Expansion slot
J Expansion slot cover
K HDD slot
USB interface
L
(USB1/2/3/4)
Speaker output
M
interface (SPK)
HDD status lamp
N
(HDD0/HDD1)
Serial interface
O
(COM1)
Serial interface
P
(COM2)
Serial interface
Q
(COM3/COM4)
R RAS interface (RAS)
S CF card interface
*1 DVI monitor cannot be connected.
*2 Since an IDE-type connection is used, the unit is not hot-swappable. When inserting/removing the
CF card, be sure that power is turned OFF.
D
J
F
L
M
O
P
S
R
For analog RGB output only.
10BASE-T/100BASE-TX/1000BASE-T Auto Changeover. This
interface uses an RJ-45 type modular jack connector (8 pins).
10BASE-T/100BASE-TX Auto Changeover. This interface uses
an RJ-45 type modular jack connector (8 pins).
For expansion board (PCI). 2 slots or 4 slots.
Expansion slot cover is removed when mounting expansion
board and DIM module.
For serial ATA HDD unit. HDD slot 0 and then HDD slot 1
from the left
4 ports. USB2.0 compatible. Type-A connector is used.
Power supply voltage
Output current
Maximum communication distance 5m
Mini pin jack connector
For HDD0 and for HDD1 from left to right.
LED
Green (lit)
Not lit
D-Sub 9-pin plug type. RS-232C, RS-422, RS-485
Changeover. CI (RI)/+5V Changeover.
D-Sub 9-pin plug type. RS-232C. CI (RI)/+5V Changeover.
D-Sub 9-pin plug type. RS-232C. COM3 and then COM4
from the top
D-Sub 9 pin socket type.
IDE-type connection
CF card (Type I/II) is available.
3
I
Right side
(2 slot type)
G
H
Q
K
N
B
Description
*1
DC5V±5%
500mA (Max.)
Indicates
HDD mounted (Normal operation)
No HDD mounted
*2
N
A