Digital Electronics Corporation PS365XA-HD40 Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Digital Electronics Corporation PS365XA-HD40. Digital Electronics Corporation PS365XA-HD40 8 pagina's. Hard disk unit

Pagina afdrukken
Environmental
The specifications given here are for a HDD unit installed in a PS-A unit.
PS-3710A, PS-3650A
Operating
Temperature
PS-3711A, PS-3651A
Storage Temperature
Ambient Humidity
Noise Resistance
(via Noise Simulator)
Electrostatic Discharge Immunity
Vibration Resistance
Shock Resistance
2

Hard Disk Unit Settings

The PS365XA-HD40 is one of the Expansion Options for PS-A Series, when shipped, set
as the PS-A's Slave drive (Second Hard Disk).When using the PS365XA-HD40 as the
PS-A's Master drive, be sure to perform the following setup.
• Using the HDD unit in an environment that is excessively hot and/or
humid will shorten the disk's usage lifetime. A wet bulb temperature of
29
or less is recommended. This is equivalent to the following data.
°C
Temperature
at 35°C
at 40°C
• If PS-A units have this HDD Unit as a built-in hard disk, the HDD
unit, when shipped, is set as the PS-A's Master. If set as the PS-A's
Slave, except for the jumper plug included, do NOT use any other
jumper plugs with the PS365XA-HD40, since it can cause a
malfunction or damage the unit.
• Pro-face's PS-A Unit built-in Windows
PS365XA-HD40 should be used as the factory settings (CF card is
set to the PS-A's Master drive and HDD unit is set to the PS-A's
Slave drive).
+5°C to +50°C
+5°C to +45°C
-10°C to +60°C
10%RH to 90%RH (No condensation)
(Wet bulb temperature: 29°C or less)
Noise Voltage: 1,500Vp-p (via noise simulator)
Pulse Width: 50ns, 500ns, 1µs
2
4.9m/s
(10Hz to 25Hz) (When Operating)
(1ms, Half-sine shock pulse) (When Shipping)
Humidity
no higher than 64%RH
no higher than 44%RH
3
6kV
2
3290m/s
®
XP Embedded and