Bitspower Hercules Pump V3 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Bitspower Hercules Pump V3. Bitspower Hercules Pump V3 15 pagina's.

Protection

Idle protection

When there is no liquid in the pump, the water pump will enter an idle speed protection mode

and run at full speed within 5 seconds.

After 5 seconds of idling, the water pump will temporarily stop running.

The pump will restart automatically after 5 seconds.

After repeating this cycle 10 times, the pump will completely stop running and will not start

again.

At this time, the power needs to be turned off before restarting.

If normal water flows through the pump before the pump stops running completely, the pump

will keep running normally.

Over / Under Voltage Protection

Over Voltage Protection 20±1V

When the input voltage is higher than the protection value, the pump will stop running within 2

seconds.

When the input voltage is lower than the protection value, the water pump will resume running

within 2 seconds.

Under Voltage Protection 6±1V

When the input voltage is lower than the protection value, the pump will stop running within 2

seconds.

When the input voltage is higher than the protection value, the water pump will resume running

within 2 seconds.

Rotor lock protection

When the rotor of the pump is blocked, the pump will automatically stop running, and resume

running after 5 seconds.

If the pump rotor continues to clog, the restart time will be extended to 15 seconds after 5

restarts.

Reverse voltage protection

When the positive and negative poles of the water pump are accidentally reversed

with 20V of power, the water pump will not run thereby preventing irreparable damage.

[ 4 ]