Siemens SIMATIC ET 200SP HA Uitrustingshandleiding - Pagina 13

Blader online of download pdf Uitrustingshandleiding voor {categorie_naam} Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 44 pagina's. Distributed i/o devices busadapter for distributed i/o
Ook voor Siemens SIMATIC ET 200SP HA: Handmatig (32 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Handmatig (38 pagina's), Uitrustingshandleiding (50 pagina's), Uitrustingshandleiding (38 pagina's), Uitrustingshandleiding (46 pagina's), Uitrustingshandleiding (42 pagina's), Uitrustingshandleiding (44 pagina's), Uitrustingshandleiding (36 pagina's), Uitrustingshandleiding (38 pagina's)

Installation

4.1

The following figure shows the connections on the interface module and the BusAdapter in

schematic form.

4.2

Installing a PROFINET cable on the BusAdapter

Depending on the configuration of the PROFINET IO system, you select electrical or optical

PROFINET IO cables for the connection of the distributed I/O.

● Electrical PROFINET IO cables:

– PROFINET cable with RJ45 connector (electrical)

– Connecting a FastConnect cable directly to the BusAdapter (electrical)

● Optical PROFINET IO cables:

– Fiber-optic cable with LC connector (optical)

The type of connecting cable determines the BusAdapter required for connecting the

distributed I/O.

Note

Strain relief of the bus cables

Make sure to secure the bus cables by installing an appropriate strain relief. Refer to the

installation guidelines of the manufacturer.

BusAdapter for Distributed I/O

Equipment Manual, 09/2019, A5E39261458-AB

- 8-wire cable

- 2-wire cable - 2-wire transfer function (variable distance)