Siemens SIMATIC ET 200SP HA Uitrustingshandleiding - Pagina 15

Blader online of download pdf Uitrustingshandleiding voor {categorie_naam} Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 44 pagina's. Distributed i/o devices busadapter for distributed i/o
Ook voor Siemens SIMATIC ET 200SP HA: Handmatig (32 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Handmatig (38 pagina's), Uitrustingshandleiding (50 pagina's), Uitrustingshandleiding (38 pagina's), Uitrustingshandleiding (46 pagina's), Uitrustingshandleiding (42 pagina's), Uitrustingshandleiding (44 pagina's), Uitrustingshandleiding (36 pagina's), Uitrustingshandleiding (38 pagina's)

Pagina afdrukken
Siemens SIMATIC ET 200SP HA Uitrustingshandleiding
Required tools
Screwdriver:
● TORX T10
or
● 3.5 mm blade width
Required accessories
● If you are using FastConnect cables, we recommend you use the Industrial Ethernet
FastConnect stripping tool (6GK1901‑1GA00) with blade cassette green (6GK1901‑1B...).
This guarantees fast and safe stripping.
● FastConnect cables (recommended types):
– IE FC TP Standard Cable GP 2x2 (6XV1840-2AH10)
– IE FC TP Trailing Cable 2x2 (6XV1840-3AH10)
– IE FC TP Marine Cable (6XV1840-4AH10)
– IE FC TP Flexible Cable GP 2x2 (6XV1870-2B)
– IE FC TP Trailing Cable 2x2 (6XV1870-2D)
– IE TP Torsion Cable 2x2 (6XV1870-2F)
– FC TP FRNC Cable GP (6XV1871-2F)
– IE FC TP Food Cable GP 2x2 (6XV1871-2L)
– IE FC TP Festoon Cable 2x2 (6XV1871-2S)
Preparation
1. Remove the BusAdapter BA 2xFC from the I/O.
2. Strip the jacket of the PROFINET connecting cable as follows:
Stripping length (outer jacket)
Distance a: 25 mm +-1 mm
Figure 4-1
BusAdapter for Distributed I/O
Equipment Manual, 09/2019, A5E39261458-AB
Length of the remaining braided shield
Distance b: 5 mm
Stripping lengths PROFINET connecting cable
Installation
4.3 BusAdapter BA 2xFC
15