Siemens SIMATIC NET Installatiehandleiding - Pagina 21

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Siemens SIMATIC NET. Siemens SIMATIC NET 34 pagina's. Network components bus terminal
Ook voor Siemens SIMATIC NET: Gebruiksaanwijzing (29 pagina's), Gebruiksaanwijzing (50 pagina's), Gebruiksaanwijzing (28 pagina's), Montagehandleiding (6 pagina's), Productinformatie (6 pagina's), Installatiehandleiding (40 pagina's), Installatiehandleiding (50 pagina's), Installatiehandleiding (40 pagina's), Referentiehandleiding (14 pagina's), Installatiehandleiding (48 pagina's), Gebruiksaanwijzing (32 pagina's)

Installing the Device

2.6.2 Connecting DC Power

Connect the positive wire from the power source to the positive/live (+/L)

terminal on the terminal block.

Positive/Live (+/L) Terminal

Negative/Neutral (-/N) Terminal

Surge Ground Terminal

Braided Ground Cable

Figure 2.6

Terminal Block Wiring

Connect the negative wire from the power source to the negative/neutral (-/N)

terminal on the terminal block.

Using a braided wire or other appropriate grounding wire, connect the surge

ground terminal to the chassis ground connection. The surge ground terminal

is used as the ground conductor for all surge and transient suppression circuitry

internal to the unit.

Connect the ground terminal on the power source to the chassis ground

terminal on the device. For more information, refer to

(Page

9)".

"Grounding the Device

RUGGEDCOM RP100

Installation Manual, 01/2021, C79000-G8976-1011-05