Siemens SINUMERIK 840D sl Uitrustingshandleiding - Pagina 23

Blader online of download pdf Uitrustingshandleiding voor {categorie_naam} Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 48 pagina's. Operator panel front: op 010s
Ook voor Siemens SINUMERIK 840D sl: Upgrade-instructies (4 pagina's), Upgrade-instructies (5 pagina's), Bedieningshandleiding (33 pagina's), Inbedrijfstellingshandleiding (36 pagina's), Upgrade-instructies (3 pagina's), Upgrade-instructies (3 pagina's), Systeemhandleiding (44 pagina's), Uitrustingshandleiding (28 pagina's), Uitrustingshandleiding (26 pagina's), Uitrustingshandleiding (28 pagina's)

Mounting

4.1

Table 4-1

Thanks to the tension jacks on the OP 010S, drill-holes or screw holes are not needed.

The OP 010S is supplied with 8 "small" tension jacks. If you have the "large" tension

jacks (6FC5248-0AF06-0AA0) in stock, then you can also use the large tension jacks when

required.

This retaining method also enables the IP65 degree of protection (but only in conjunction

with a circumferential seal and when the protective USB cap is fitted).

Operator panel front: OP 010S

Equipment Manual, 12/2022, A5E50751046B AA

Dimensions of the mounting opening

Width (mm)

Height (mm)

285

Mounting depth T3 + clearance (mm)

304

with PCU 50.5

with TCU 30.3

120 + 10

69 + 10