Siemens SINUMERIK 840D sl Uitrustingshandleiding - Pagina 25

Blader online of download pdf Uitrustingshandleiding voor {categorie_naam} Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 48 pagina's. Operator panel front: op 010s
Ook voor Siemens SINUMERIK 840D sl: Upgrade-instructies (4 pagina's), Upgrade-instructies (5 pagina's), Bedieningshandleiding (33 pagina's), Inbedrijfstellingshandleiding (36 pagina's), Upgrade-instructies (3 pagina's), Upgrade-instructies (3 pagina's), Systeemhandleiding (44 pagina's), Uitrustingshandleiding (28 pagina's), Uitrustingshandleiding (26 pagina's), Uitrustingshandleiding (28 pagina's)

①

②

③

Figure 4-2

Note

The 100 mm clearance above and below the PCU is not necessary when assembled with a TCU

as a TCU does not have any fan in its housing.

4.2

Mounting on the mounting wall

When you are using a combination of OP 010S and PCU, it is advisable to install the OP 010S in

the assembly panel first and then mount the PCU on the OP 010S.

NOTICE

Impermissible mounting positions can cause malfunctions

Observe the permissible mounting position: Deviating by up to 5º from the vertical.

This value can be further restricted by mounted components (e.g. PCU).

Operator panel front: OP 010S

Equipment Manual, 12/2022, A5E50751046B AA

Clearance for cables and ventilation

M4x8 housing screws for attaching the PCU

M3x8 housing screws for attaching the PCU/TCU

Attaching the PCU to the OP010S operator panel front

4.2 Mounting on the mounting wall

Mounting