Siemens SITRANS WW310 Gebruiksaanwijzing - Pagina 16

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SITRANS WW310. Siemens SITRANS WW310 48 pagina's. Weighfeeders

Mechanical installation

5.1 Installation

5.1

Installation

Note

• Only qualified personnel are authorized to install and operate this equipment. Installation

shall be in accordance with local regulations, standards and established safety practices.

Read and understand the instructions before installing, operating or maintaining the

equipment.

• Flexible in-feed connections are REQUIRED for all applications. Flexible discharge

connections are also recommended.

Step 1

Construct the necessary support framework to provide a sturdy, rigid base. Vibration isolators

are recommended if the location is subject to moderate or heavy vibration.

Step 2

Align the in-feed section of the weighfeeder with the discharge of the feed device. Prevent

twisting or misalignment that could induce stress on the weighing section.

Step 3

Install a gasket between the flanges for dust control.

Step 4

Securely fasten the unit to the rigid, level structure constructed in Step 1 (Page 14). Use a level

for verification and shim as necessary. Prevent any twisting of the frame that may affect

weighfeeder performance.

Note

The inlet and discharge of the weighfeeder will not support load.

Operating Instructions, 03/2014, A5E33490433-AA

SITRANS WW310