Epson 1705C - PowerLite XGA LCD Projector Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Epson 1705C - PowerLite XGA LCD Projector. Epson 1705C - PowerLite XGA LCD Projector 3 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 1705C - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Snelle installatie (4 pagina's), Bedieningshandleiding (47 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Onderdelenlijst (1 pagina's), Documentatie bijwerken (12 pagina's), Functiehandboek (5 pagina's), Specificaties (2 pagina's), Software Handleiding (2 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Pagina afdrukken
Epson 1705C - PowerLite XGA LCD Projector Snelstarthandleiding
CHOOSE A PRESENTATION METHOD
"Tethered" (recommended when viewing video)
1. Make sure you've turned on the projector
and adjusted the image as described earlier.
2. Locate the computer cable that came with
the projector.
Connect one end to the projector's blue
Computer (Component Video) port.
Connect the other end to the laptop's video
out port (may also be blue) or monitor port.
3. Press the Source Search button on the
projector or the remote control and use the
directional arrow button to select
'computer.'
4. If you see a blank or blue screen that reads
"No signal," hold down the FN (function)
key on the keyboard and tap the F4 or F5
key (
) until the image is on your
desktop as well as projecting to the screen.
(Allow a few seconds for the projector to
sync up.)
You may see this: