Samsung 913V - SyncMaster - 19" LCD Monitor Servicehandleiding - Pagina 8
Blader online of download pdf Servicehandleiding voor {categorie_naam} Samsung 913V - SyncMaster - 19" LCD Monitor. Samsung 913V - SyncMaster - 19" LCD Monitor 35 pagina's. Tft-lcd monitor gs19es chassis
Ook voor Samsung 913V - SyncMaster - 19" LCD Monitor: Producthandleiding (8 pagina's)
Pagina afdrukken
3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the GS19ET TFT-LCD
monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these
components.
3-1 Disassembly
Cautions:1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use any metal instrument except provided jig to
separate the cabinet.
3. R/Cover opening jig : BH81-00001A
1. Place monitor face down on cushioned table.
Remove 4 screws from grip on the stand and
remove the stand.
2. Remove 2 screws from the rear cover and
insert the opening jig into the grooves at each
side and press until it clicks.
3. Lift the rear cover and remove 1 screws from
the shield.
4. Lift up the panel shield and remove 4 screws
from the panel shield. (Right / Left)
5. Lift up the panel shield and carefully remove
the silicon glue on the cables with a Nipper.
Caution : Lamp wire may be easily
!
damaged. Please use caution when removing
the silicon.
3-1