Cisco 522 Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 522. Cisco 522 40 pagina's. Ip phones with multiplatform firmware
Ook voor Cisco 522: Gebruikershandleiding (46 pagina's), Administratiehandleiding (48 pagina's), Installatiehandleiding (39 pagina's), Handmatig (24 pagina's)

Cisco Headset 560 Series Multibase

Number

Cisco Headset 560 Series Multibase

The multibase can connect up to three call sources through Bluetooth, the USB connector, or the Y-cable.

The multibase can save up to four Bluetooth devices. You can switch between call sources using the buttons

on the multibase. You use the call control buttons on the headset to answer and end calls. When your headset

is in the base, you automatically answer the call when you remove the headset from the base. You can return

the headset to the base to end the call.

The multibase comes with the following connector cables:

• USB to USB Cable: for Cisco IP Phones with USB connectivity

• USB Y-Cable: for Cisco IP Phones without a USB port

• Mini USB Cable: for PC or Mac.

• Mini USB to USB-C Cable: available separately for PC or Mac devices.

Figure 11: Multibase LEDs

The following table describes the Cisco Headset 560 Series Multibase multibase LEDs.

Headsets

Name

Call Status LED

Description

Alerts you to the call state:

• Incoming call—Blinking green

• Active call—Steady green

• Muted call—Steady red

Headsets