Cisco 522 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 522. Cisco 522 40 pagina's. Ip phones with multiplatform firmware
Ook voor Cisco 522: Gebruikershandleiding (46 pagina's), Administratiehandleiding (48 pagina's), Installatiehandleiding (39 pagina's), Handmatig (24 pagina's)

Headsets

Cisco Headset 560 Series Standard Base

The standard base charges your headset and has LEDs that shows your headset's battery level and call state.

You can also answer and end calls when you lift or place your headset on the base.

The standard base comes with the following connector cables:

• USB to USB Cable: for devices with USB connectivity

• USB Y-Cable: for Cisco IP Phones without a USB port

• USB-A to USB-C Cable: available separately for PC or Mac devices.

Figure 10: Standard Base LEDs

The following table describes the standard base.

Table 5: Standard Base LEDs

Number

Name

Battery Status LED

Cisco Headset 560 Series Standard Base

Description

Indicates the headset battery charge and base status:

• Headset battery strength—LEDs blink and change to

solid as the battery charges.

• Headset update in progress—LEDs blink in sequence,

left to right.

• Headset and base not paired—All LEDs blink

• Power save mode—Middle LED shows solid.

The base enters power save mode when there is no call source

connectivity after 10 minutes.

Headsets