Cisco 6800 Series Hardware-installatie - Pagina 11

Blader online of download pdf Hardware-installatie voor {categorie_naam} Cisco 6800 Series. Cisco 6800 Series 20 pagina's. Ip phone, multiplatform phones
Ook voor Cisco 6800 Series: Snelstarthandleiding (3 pagina's), Gebruikershandleiding (8 pagina's), Onderhoudshandleiding (8 pagina's), Gebruikershandleiding (14 pagina's), Handleiding voor probleemoplossing (12 pagina's), Snelstarthandleiding (4 pagina's), Gebruikershandleiding (22 pagina's), Snelstarthandleiding (4 pagina's), Installatiehandleiding (39 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Cisco 6800 Series Hardware-installatie
Hardware Installation
Step 9
If required, plug the power adapter into the electrical outlet.
What to do next
Do one of these:
• Base station installation:
• Repeater installation:

Mount the Base Station or Repeater on a Desk

You can place the base station or repeater on a desk or other horizontal surface (for example, a book shelf).
Select a location where the base station or repeater won't be easily knocked off.
The base station and repeater have a range of up to 984 feet (300 meters) outdoors and a range of 164 feet
(50 meters) indoors.
In this task, the term device means the base station or repeater.
Before you begin
You need:
• Base station: LAN connection close to the mounting location.
• Base station: If you do not use PoE, a power outlet close to the mounting location.
• Repeater: A power outlet close to the mounting location.
• Ensure that the base station can communicate with the network (see
Determine the best placement, taking into account the coverage area and the building construction materials.
• If you have a 210 Multi-Cell Base Station, you may need to add additional base stations or repeaters.
• If you have a 110 Single-Cell Base Station, you may need to add 110 Repeaters.
You can use the site survey tool on the handset to plan placement.
Procedure
Step 1
Base station only: Connect the Ethernet cable to the device and route the cable through the slot in the device.
Step 2
Provide power to the device:
• Base station with PoE on the LAN: Additional power is not required.
• Manual configuration:
• Automatic configuration:
Add a Repeater
6). After it can communicate and the LED is green, you can unplug the cables if you haven't tested the
base station in the final location.
Sign into the Administration Web Page
Sign into the Administration Web Page
Mount the Base Station or Repeater on a Desk
and
Configure the Base Station
and
Start Handset Registration
Install the Base Station, on page
Hardware Installation
11