Epson 745c - PowerLite XGA LCD Projector Handmatig - Pagina 14

Blader online of download pdf Handmatig voor {categorie_naam} Epson 745c - PowerLite XGA LCD Projector. Epson 745c - PowerLite XGA LCD Projector 24 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 745c - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Handleiding voor snelle installatie (2 pagina's), Bedieningshandleiding (47 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (30 pagina's), Snelle installatie (4 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Technisch overzicht (7 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Snelle installatie (2 pagina's)

Pagina afdrukken

Epson 745c - PowerLite XGA LCD Projector Handmatig

Epson PowerLite 745c Projector

12. Verify that you've enabled your computer's connection to

the access point. It should be listed as shown above, with

the small icon

next to it, indicating a connection.

If it's not listed, click

Configure

your access point.

13. When done, click

. Continue with "Projecting

Wirelessly" on page 15.

Checking the Gateway (Access Point's) IP Address

If you're entering IP addresses manually in Access Point mode

and need to find out the gateway IP address (the IP address of

your access point), make sure the wireless connection to the

access point is currently active, as described in the previous

section.

Note:

If you can't identify the gateway address using this Windows

utility, use the administrator's utility software that came with

your access point.

1. Access your wireless network Properties window. For

example, in Windows XP click

Network and Internet Connections

double-click the

Network Connections

2. Right-click the

Wireless Network Connection

select

. Then click the

Status

The gateway's (access point's) IP address is listed as shown:

Configuring the Network Settings for Macintosh

Your AirPort software is automatically configured to allow

your Macintosh to detect both computer-to-computer (Ad

Hoc) and Access Point networks.

Typically you only need to select your projector's ESSID (Ad

Hoc) or your AirPort network name (Access Point) on the

Macintosh menu bar. If you're having problems connecting to

the projector, follow these steps:

1. From the Apple pull-down menu, select

Preferences

Epson PowerLite 745c Projector

and then type the name of

Start > Control Panel >

. Then

icon.

icon and

tab.

Support

Gateway

address

System

2. Click the

Network

menu.

Select Automatic

Select Network Port

Configurations

then select AirPort

3. Make sure Location is set to

4. Select

Network Port Configurations

down menu.

5. Under Port Configurations, select

6. Click

Apply Now

7. Ad Hoc mode: Go to step 10.

Access Point mode: Start the AirPort Admin utility. Select

your base station, then click

8. On the AirPort tab, make sure your AirPort network name

matches your projector's ESSID. If not, enter the

projector's ESSID in the AirPort Network text box and

click

Update

9. If you turned DHCP in your projector's Advanced menu,

click the

Network

checkbox is selected. If you need to select it,

addresses

click

Update

10. Click the AirPort icon on the menu bar at the top of the

Macintosh desktop. You see the AirPort status menu:

11. Check to make sure AirPort is turned on.

12. Select your projector's ESSID (Ad Hoc) or the name of

your AirPort network (Access Point).

8/04

icon. You see the Network settings

Automatic

in the Show pull-

AirPort

and close the window.

Configure

tab and make sure the

Distribute IP