Cisco 7940G Administratiehandleiding - Pagina 11

Blader online of download pdf Administratiehandleiding voor {categorie_naam} Cisco 7940G. Cisco 7940G 29 pagina's. Ios telephony services ip phone
Ook voor Cisco 7940G: Gebruikershandleiding (21 pagina's), Gebruikershandleiding (25 pagina's), Gegevensblad (7 pagina's), Handmatig (35 pagina's), Snelle referentie (2 pagina's), Gebruikershandleiding (15 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (20 pagina's), Telefoonhandleiding (17 pagina's), Handleiding voor beheerders (15 pagina's), Gebruikershandleiding (16 pagina's), Referentiehandleiding (24 pagina's), Handmatig (21 pagina's), Installatiehandleiding (12 pagina's), Gebruikershandleiding (10 pagina's)

Pagina afdrukken

Chapter 3

Initializing Cisco Unified IP Phones

Prerequisites

•

To unlock the phone, follow these steps:

Procedure

Press Settings > Unlock Config.

Step 1

The password prompt appears.

Enter the phone's password.

Step 2

Press Accept.

Step 3

Locked menus are unlocked. The Unlock Config menu choice changes to Lock Config and lockable

menus remain unlocked while you work within the Settings menu.

Note

To manually relock the phone, select Settings > Lock Config.

Step 4

Setting and Restoring Network Parameters

To modify network parameters using the phone menus, follow these steps:

Procedure

Unlock the Network Configuration menu.

Step 1

See the

Select Settings > Network Configuration.

Step 2

The Network Configuration menu appears.

Select the parameters you want to change and set them to the desired values.

Step 3

Network parameters that can be modified are listed in

modified are listed in

Appendix D, "SIP IP Phone Parameters."

Select Save.

Step 4

The phone programs the new information into flash memory and resets.

Relock the phone.

Step 5

OL-7890-01

Set the phone password with the phone_password parameter in the phone-specific configuration file.

When you exit the Settings menu, lockable menus automatically relock.

"Unlocking the Phone" section on page

Table

3-2. For a complete alphabetical list of configurable parameters, see

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

Configuring the SIP Parameters Manually

3-10.

Table

3-1. Network parameters that cannot be

3-11