Siemens SITRANS RD500 Gebruiksaanwijzing - Pagina 22

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SITRANS RD500. Siemens SITRANS RD500 48 pagina's. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Ook voor Siemens SITRANS RD500: Gebruiksaanwijzing (8 pagina's), Gebruiksaanwijzing (8 pagina's), Gebruiksaanwijzing (8 pagina's), Toepassingshandleiding (6 pagina's), Handmatig (11 pagina's), Toepassingsvoorbeelden (9 pagina's)

Pagina afdrukken
Siemens SITRANS RD500 Gebruiksaanwijzing
•
The following information will be provided by the user's Mobile Data Plan Provider:
Number or APN
Login Username
Login Password
•
Client Connection allows the user to select the type of client connection (on
demand, or permanent connection).
The RD500 ensures the GPRS communicaiton link by monitoring traffic. The
Note:
RD500 must see both transmit and receive traffic otherwise the inactivity timer
forces the link to be dropped. The inactivity timer period is 10 minutes.
•
Modem Status shows the current status of your connected modem.
Control
After the Modbus device or the digital module with output is properly configured, the
following fields are available.
On the Control tab, the user can write values to a connected Modbus Slave device (for
example, writing a pump setpoint), or activate a relay or solid state output from the digital
modules. Permission levels Operator and Super User only have write access to these
fields (see below).
1.
User must contact a local data plan provider for data plan options.
Page 20
SITRANS RD500 – OPERATING INSTRUCTIONS
Local Address
Remote Address
Remote Mask
1
7ML19985MA01