Siemens SITRANS RD500 Gebruiksaanwijzing - Pagina 23

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SITRANS RD500. Siemens SITRANS RD500 48 pagina's. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Ook voor Siemens SITRANS RD500: Gebruiksaanwijzing (8 pagina's), Gebruiksaanwijzing (8 pagina's), Gebruiksaanwijzing (8 pagina's), Toepassingshandleiding (6 pagina's), Handmatig (11 pagina's), Toepassingsvoorbeelden (9 pagina's)

Pagina afdrukken
Siemens SITRANS RD500 Gebruiksaanwijzing

Password and User Management

Access and Security

Accessing SITRANS RD500 is the same as accessing any website. However, to ensure
that your access is secure, you are required to enter your User Name and Password.

User Management

There are three levels of user for the SITRANS RD500:
Basic: Read only access to RD500 data; can download logs.
Operator: All basic user rights; also on Control tab, can write to units configured for write
access.
Super User: Full access to set up and configure RD500, including allocating user
accounts, and changing password.
Up to 10 users can be added to each SITRANS RD500 system.
Note:
Defaults
Default User Name : admin
Default Password: rd500
The User Name is not case sensitive; the Password is case sensitive. Password entry can
be any combination of the full ASCII character set, without spaces or "(quotation marks).
Changing Password
Once you have successfully logged on, you can change your password.
1.
Click Configure on the navigation bar.
2.
Click on Users.
3.
Check box Allow passwords to be modified: this is a secure or direct connection and
click Apply. Enter new password and click Apply.
If you have forgotten your password, perform a local reset of the unit to
Note:
gain access. This will reset the user name and password to Defaults shown above.
Password reset requires USB utility available on CD and online at
www.siemens.com/sitransRD500.
7ML19985MA01
SITRANS RD500 – OPERATING INSTRUCTIONS
Page 21