Siemens SITRANS RD500 Kullanım Talimatları Kılavuzu - Sayfa 23

Anahtar Siemens SITRANS RD500 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SITRANS RD500 48 sayfaları. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Ayrıca Siemens SITRANS RD500 için: Kullanım Talimatları Kılavuzu (8 sayfalar), Kullanım Talimatları Kılavuzu (8 sayfalar), Kullanım Talimatları Kılavuzu (8 sayfalar), Başvuru Kılavuzu (6 sayfalar), Manuel (11 sayfalar), Uygulama Örnekleri (9 sayfalar)

Password and User Management

Accessing SITRANS RD500 is the same as accessing any website. However, to ensure

that your access is secure, you are required to enter your User Name and Password.

There are three levels of user for the SITRANS RD500:

Basic: Read only access to RD500 data; can download logs.

Operator: All basic user rights; also on Control tab, can write to units configured for write

access.

Super User: Full access to set up and configure RD500, including allocating user

accounts, and changing password.

Up to 10 users can be added to each SITRANS RD500 system.

Note:

Defaults

Default User Name : admin

Default Password: rd500

The User Name is not case sensitive; the Password is case sensitive. Password entry can

be any combination of the full ASCII character set, without spaces or "(quotation marks).

Changing Password

Once you have successfully logged on, you can change your password.

Click Configure on the navigation bar.

Click on Users.

Check box Allow passwords to be modified: this is a secure or direct connection and

click Apply. Enter new password and click Apply.

If you have forgotten your password, perform a local reset of the unit to

Note:

gain access. This will reset the user name and password to Defaults shown above.

Password reset requires USB utility available on CD and online at

www.siemens.com/sitransRD500.

7ML19985MA01

SITRANS RD500 – OPERATING INSTRUCTIONS

Page 21