Epson BrightLink 485Wi Handmatig - Pagina 21

Blader online of download pdf Handmatig voor {categorie_naam} Epson BrightLink 485Wi. Epson BrightLink 485Wi 21 pagina's. Lamp and status information
Ook voor Epson BrightLink 485Wi: Start hier Handleiding (6 pagina's), Bedieningshandleiding (47 pagina's), Aansluithandleiding (6 pagina's), Installatiehandleiding (5 pagina's), Montagesjabloon (5 pagina's), Specificaties (6 pagina's), Conformiteitsverklaring (4 pagina's), Specificaties (6 pagina's), Installatie Handboek (3 pagina's), Installatie Handboek (2 pagina's), Installatie Handboek (5 pagina's), Start hier Handleiding (6 pagina's)

Touch the center of the next circle and then repeat. When you get to the bottom

of the column, the next circle appears at the top of a new column.

If you make a mistake, press the Esc button on the remote control to go back to

the previous circle. To restart the calibration process, press and hold the Esc

button.

Continue until all of the circles disappear.

After this process is complete, it will take a moment for the projector to re-

establish its connection with the PC. Once the connection is re-established, test

the calibration by checking if the cursor lines up with the pen tip. Be sure to hold

the pen so that the tip is pointed straight at the board and that you are not

coming in at an angle to ensure the best operation.

-20-