Cisco Unified 7905G Netwerkinstellingen configureren - Pagina 13

Blader online of download pdf Netwerkinstellingen configureren voor {categorie_naam} Cisco Unified 7905G. Cisco Unified 7905G 34 pagina's. Ip talk series
Ook voor Cisco Unified 7905G: Gebruikershandleiding (21 pagina's), Gegevensblad (5 pagina's), Gebruikershandleiding (25 pagina's), Telefoonhandleiding (46 pagina's), Snelle referentie (2 pagina's), Gebruikershandleiding (20 pagina's), Referentiehandleiding (20 pagina's)

Pagina afdrukken
Cisco Unified 7905G Netwerkinstellingen configureren
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Modifying DHCP Settings
Enabling DHCP
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Dynamic Host Configuration Protocol (DHCP) automatically assigns IP
addresses to devices when you connect them to the network. This section provides
information about enabling DHCP and releasing a DHCP-assigned IP address in
the following topics:
Enabling DHCP, page 4-13
•
•
Disabling DHCP, page 4-15
Releasing a DHCP Address, page 4-16
•
Cisco Unified IP Phones enable DHCP by default, but you can reset the protocol
if it becomes disabled.
To enable DHCP for the Cisco Unified IP Phone, follow these steps:
For instructions, see the
In the pane on the left under Change Configuration, click Network Parameters.
To enable DHCP, enter 1 in the DHCP field and click Apply.
"Accessing Network Settings through a Phone
4-2.
Modifying DHCP Settings
4-13