Ricoh SP 200 Software-installatiehandleiding - Pagina 11
Blader online of download pdf Software-installatiehandleiding voor {categorie_naam} Ricoh SP 200. Ricoh SP 200 21 pagina's. Software installation guide
Ook voor Ricoh SP 200: Snelle installatiehandleiding (2 pagina's), Snelle installatiehandleiding (2 pagina's), Snelle installatiehandleiding (2 pagina's)
Pagina afdrukken
4.
From the CD-ROM menu, click [Network Quick Install (Fixed IP)].
5.
Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
6.
Enter the MAC and IP addresses, and then click [OK].
To specify these in an IPv6 environment, click [Cancel], and then proceed to Step 8.
•
MAC address
Enter the MAC address shown on the network setting list.
•
IP address
Enter the user's IP address.
The computer's IP address can be ascertained using Command Prompt.
To display the IP address, open Command Prompt, enter "ipconfig", and then press the
[Enter] key.
Enter the IP address of the computer being used with the variable part in the IP address
modified.
•
Subnet mask, Default gateway address
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
CTT190
CTT191
11