Ricoh SP 311DNW Aan de slag handleiding - Pagina 9

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Ricoh SP 311DNW. Ricoh SP 311DNW 45 pagina's. Network settings guide
Ook voor Ricoh SP 311DNW: Snelle installatiehandleiding (2 pagina's), Specificaties (4 pagina's), Installatiehandleiding (2 pagina's)

Pagina afdrukken

2.2.2 Wireless (Wi-Fi) Connection

Your new printer supports Wi-Fi Protected Setup (WPS), a network security standard

that allows Wi-Fi routers, e.g., Linksys, Netgear, etc., to easily connect, allowing you

to print to the device wirelessly. Also called Push Button Control, PBC simply means

that you can "Push 'n' Connect" two devices that support WPS; you don't need to

know the wireless network's security key/passphrase. So if you wish to wirelessly

print, for example, from your laptop or tablet, it is recommended that you use the

PBC (WPS) Method outlined below. To use this method, your router must support Wi-Fi Protected Setup,

and have a dedicated WPS button.

Note:

Depending on the Wi-Fi router, the WPS button may have another name. For details, refer to the

•

wireless router manual.

When using this method, optimum security for the devices is automatically configured, based on the

•

connection environment. As such, it cannot be assumed that the configured security setting is the most

secure.

If your router does not have a dedicated WPS button, see

•

Before proceeding, please check the following:

Wireless router is working correctly, i.e., you can wirelessly connect to the Internet from your laptop.

•

Printer power switch is On.

•

Cable (USB/Ethernet) is not connected to the printer.

•

PBC (WPS) Method

The following operations are only performed when connecting a new printer to your Wi-Fi router for the

first time. Once a WPS connection is configured, the Smart Organizing Monitor software utility can be

used to view or change wireless settings.

1. Press [Stop/Start] for two seconds or less.

Note:

The three control panel indicator lights flash - Power, Alert and

•

Toner/Paper End, in that order.

If indicator lights do not flash, be sure that there are no cables connected to the printer.

−

If you press and hold [Stop/Start] for more than two seconds, the PIN Code Page prints. Disregard,

•

unless using

PIN Method

2. Firmly press the router's [WPS] button, within two minutes. Watch printer

control panel lights.

RICOH SP 311DNw B&W Network Laser Printer

for wireless connection.

Getting Started Guide

Appendix F: Other Wireless Setup

Methods.