Ricoh SP 311DNW Aan de slag handleiding - Pagina 35
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Ricoh SP 311DNW. Ricoh SP 311DNW 45 pagina's. Network settings guide
Ook voor Ricoh SP 311DNW: Snelle installatiehandleiding (2 pagina's), Specificaties (4 pagina's), Installatiehandleiding (2 pagina's)
Pagina afdrukken
Appendix
F
Fi router – PIN Method and Manual Method. These methods can be an alternative to the
if a Wi-Fi router does not support WPS or does not have a dedicated WPS button.
PIN Method
You can enable wireless communication by registering the device's PIN through the router's web page. In
order to successfully connect using this method, you need the device's PIN (instructions below) and the
router's URL/IP address. You'll need to log in to the router's web page, so have your user name and
password ready. Once logged in, you can enter the device's PIN, thus establish the printer as a client on
your wireless LAN.
Important:
For assistance with the router web page URL/IP address and login credentials, please contact your Wi-Fi
•
installer, corporate Help Desk or router manufacturer.
NETGEAR'S router web page is used for illustration purposes.
•
Before proceeding, please check the following:
Wireless router is working correctly, e.g., you can wirelessly connect to the Internet from your laptop.
•
A cable (USB or Ethernet) is not connected to the printer.
•
Printer power switch is On.
•
To connect using the PIN Method, proceed as follows:
1. Launch web browser from computer connected to router.
a. Enter router URL/IP address, e.g., http://www.routerlogin.net.
b. Enter User Name and Password.
c. Press [OK].
Note:
For NETGEAR routers, adding a WPS client (such as a printer) is
•
performed through the [ADVANCED] tab [WPS Wizard], as shown
below.
Other Wireless Setup Methods
There are other methods used to wirelessly network the printer to your computer using a Wi-
RICOH SP 311DNw B&W Network Laser Printer
Getting Started Guide
PBC (WPS) Method
35