Ricoh SP 311DNW Başlangıç Kılavuzu - Sayfa 35

Yazıcı Ricoh SP 311DNW için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Ricoh SP 311DNW 45 sayfaları. Network settings guide
Ayrıca Ricoh SP 311DNW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Appendix

Fi router – PIN Method and Manual Method. These methods can be an alternative to the

if a Wi-Fi router does not support WPS or does not have a dedicated WPS button.

PIN Method

You can enable wireless communication by registering the device's PIN through the router's web page. In

order to successfully connect using this method, you need the device's PIN (instructions below) and the

router's URL/IP address. You'll need to log in to the router's web page, so have your user name and

password ready. Once logged in, you can enter the device's PIN, thus establish the printer as a client on

your wireless LAN.

Important:

For assistance with the router web page URL/IP address and login credentials, please contact your Wi-Fi

•

installer, corporate Help Desk or router manufacturer.

NETGEAR'S router web page is used for illustration purposes.

•

Before proceeding, please check the following:

Wireless router is working correctly, e.g., you can wirelessly connect to the Internet from your laptop.

•

A cable (USB or Ethernet) is not connected to the printer.

•

Printer power switch is On.

•

To connect using the PIN Method, proceed as follows:

1. Launch web browser from computer connected to router.

a. Enter router URL/IP address, e.g., http://www.routerlogin.net.

b. Enter User Name and Password.

c. Press [OK].

Note:

For NETGEAR routers, adding a WPS client (such as a printer) is

•

performed through the [ADVANCED] tab  [WPS Wizard], as shown

below.

Other Wireless Setup Methods

There are other methods used to wirelessly network the printer to your computer using a Wi-

RICOH SP 311DNw B&W Network Laser Printer

Getting Started Guide

PBC (WPS) Method