Cisco 2500 Series Configuratiehandleiding - Pagina 16

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 2500 Series. Cisco 2500 Series 50 pagina's. Wireless controller
Ook voor Cisco 2500 Series: Handleiding installeren (12 pagina's), Configuratiehandleiding (19 pagina's), Uitrolhandleiding (23 pagina's), Aan de slag handleiding (47 pagina's)

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

to hand out leases to the connected clients. (Note: The WLC's DHCP server does not lease

addresses to the AP.) The instructions for doing so are included at the end of this document.

From the main menu, click Controller.

In the navigation pane, click Interfaces. Verify that the proper IP addresses are

assigned to the interfaces.

Under Interface Name click management. Note: the screenshot is from a Cisco 5500.

7.4 and later versions provide redundancy management and redundancy port entries.

7.6 and later versions support a virtual interface entry. If the interface is not present on

the model being configured, no values need to be entered.

Under DHCP Information, enter the IP address of the Primary DHCP Server.

Repeat this step for the ap-manager interface, if present on the model configured.

Click the Apply button and save the changes.

721-1001-000-AH.docx

December 2016