CAB WICON SQUIX Servicehandleiding - Pagina 14

Blader online of download pdf Servicehandleiding voor {categorie_naam} CAB WICON SQUIX. CAB WICON SQUIX 18 pagina's. Wrap-around applicator

Adjustments

4.1

Note!

The applicator must be operated with the printer to adjust the centering panels.

Checking

 Switch on the system

 Insert the calibration rod 10 mm (1 / Part No. 5988543).

 Turn the winder plate by pressing the single-step key

If the rod hunting seems to be excessive the centering panels (7) may be adjusted individually.

Fig. 15

Adjusting the centering panels

Adjusting

 Remove the side covers.

Caution!

Risk of hand injuries

 Do not grasp in the area of the turning winder plate!

 Loosen two screws (2) and slightly pivot the centering panel (3).

 Tighten the screws and repeat the check.

 If necessary repeat the adjustment.

 Mont the side covers.

1 2

and observe the hunting of the rod.