CAB EOS5 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CAB EOS5. CAB EOS5 15 pagina's.
Ook voor CAB EOS5: Servicehandleiding (20 pagina's)
Pagina afdrukken
10
3
Operation
3.3 Standard Operation
Switch on the printer.
The cutter performs a synchronization action.
i
Note!
To operate the cutter with continuous material in the printer menu
Setup - > Labels - > Label sensor the setting Continuous media has to be
selected. Otherwise no synchronization cut is carried out.
Press
cut off.
That synchronization is not necessary when the printhead was not opened
between print jobs, even if the printer was powered off between print jobs.
Send a print job.
All labels in the job will be printed without stopping and be cut as chosen in
the software : after each label, after a specific quantity of labels, or at the
end of a print job.
i
Note!
Between the print jobs a direct cut can be released by pressing
3.4 Cutting on Demand
In the "Cut on Demand" mode the print job will be split into steps, which can
be released separately.
Choose Printing > Print on demand = On.
4. Printer Configuration.
Send a print job.
Press
The first label will be printed and cut.
Press
. For synchronization the media will be moved forward and
on the control panel.
.
again to print and cut the next label.
10