- ページ 10

カッター CAB EOS5のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。CAB EOS5 15 ページ。
CAB EOS5 にも：サービスマニュアル (20 ページ)

Operation

3.3 Standard Operation

 Switch on the printer.

The cutter performs a synchronization action.

Note!

To operate the cutter with continuous material in the printer menu

Setup - > Labels - > Label sensor the setting Continuous media has to be

selected. Otherwise no synchronization cut is carried out.

 Press

cut off.

That synchronization is not necessary when the printhead was not opened

between print jobs, even if the printer was powered off between print jobs.

 Send a print job.

All labels in the job will be printed without stopping and be cut as chosen in

the software : after each label, after a specific quantity of labels, or at the

end of a print job.

Note!

Between the print jobs a direct cut can be released by pressing

In the "Cut on Demand" mode the print job will be split into steps, which can

be released separately.

 Choose Printing > Print on demand = On.

 4. Printer Configuration.

 Send a print job.

 Press

The first label will be printed and cut.

 Press

. For synchronization the media will be moved forward and

on the control panel.

again to print and cut the next label.