- ページ 9

カッター CAB EOS5のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。CAB EOS5 15 ページ。
CAB EOS5 にも：サービスマニュアル (20 ページ)

Operation

 Fold down the cutter.

 Insert labels for tear-off mode  Operator's manual of the printer.

Place the media strip between the printhead and the drive roller, so that

the front edge of the strip reaches through the cutter.

Figure 3

Guiding the labels into the cutter

 Guide the labels (2) into the slot (1) and fold up the cutter.

 Insert ribbon  Operator's manual of the printer.

 Activate the cut mode in the software.

In direct programming use the "C" command.

 Programming Manual of the printer.

 Configure the cut parameters  4. Printer Configuration

Note!

The cut parameters are only accessible with cutter installed.