CAB EOS5 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Фреза CAB EOS5. CAB EOS5 15 страниц.
Также для CAB EOS5: Руководство по эксплуатации (20 страниц)

Печатать страницу

Operation

3.1 Loading Material

 Fold down the cutter.

 Insert labels for tear-off mode  Operator's manual of the printer.

Place the media strip between the printhead and the drive roller, so that

the front edge of the strip reaches through the cutter.

Figure 3

Guiding the labels into the cutter

 Guide the labels (2) into the slot (1) and fold up the cutter.

 Insert ribbon  Operator's manual of the printer.

3.2 Reference to the Programming

 Activate the cut mode in the software.

In direct programming use the "C" command.

 Programming Manual of the printer.

 Configure the cut parameters  4. Printer Configuration

Note!

The cut parameters are only accessible with cutter installed.