Cisco Unified Communications Manager 8.5(1) Snelstarthandleiding - Pagina 8
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco Unified Communications Manager 8.5(1). Cisco Unified Communications Manager 8.5(1) 20 pagina's. 850 series and 870 series access routers cabling and setup
Ook voor Cisco Unified Communications Manager 8.5(1): Gegevensblad (8 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 2. Cisco One-Year Limited Hardware Warranty Terms
- 3. Locate the Product Serial Number
- 4. Before Installation
- 5. Connect the Antenna to the Wireless Router (Optional)
- 6. Connect the Power-Over-Ethernet Module to the Cisco 870 Series Router (Optional)
- 7. Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
- 7. Console Port
- 7. Power Adapter
- 8. Connect the Router
- 9. Install SDM and Configure the Router
- 10. Related Documentation
- 11. Obtaining Documentation and Submitting a Service Request
Chapter 1
Connect the Antenna to the Wireless Router (Optional)
Figure 1-4
Cisco 871 Wireless Router with Two Antennas
SN: XXXNNNNXXXX
1
LEFT
0
FE0
Step 1
Step 2
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
1-8
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
LAN
FE1
FE2
FE3
To connect the antenna or antennas to a wireless router, follow these steps:
Attach each antenna to a reverse-polarity threaded Neill-Concelman (RP-TNC)
connector on the back of the router and tighten the connector hand-tight.
After you connect the antenna to the back of the router, orient the antenna so that
it is straight up.
Cisco 871W
WAN
CONSOLE
RESET
AUX
FE4
RIGHT / PRIMARY
+5,+12 VDC
78-16262-04