Cisco 500 Series Snelstarthandleiding - Pagina 15

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 500 Series. Cisco 500 Series 21 pagina's. Stackable managed switches
Ook voor Cisco 500 Series: Handleiding veiligheidsinformatie (42 pagina's), Handmatig (4 pagina's), Snel aan de slag (13 pagina's), Gegevensblad (5 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (6 pagina's), Gebruikershandleiding (46 pagina's), Handmatig (40 pagina's), Administratiehandleiding (48 pagina's), Handmatig (24 pagina's), Probleemoplossing en onderhoud (15 pagina's), Snelle referentiehandleiding (7 pagina's), Snelstarthandleiding (25 pagina's)

Reset Button

The switch can be reset by inserting a pin or paper clip into the reset

button opening on the front panel of the switch. See

to the Factory Default Settings and Troubleshooting, page 15

details.

The power port and console port are located on the back panel of the

switch.

Power—Connects the switch to AC power.

Console—Connects a serial cable to a computer serial port so that it can

be configured by using a terminal emulation program.

Returning the Device to the Factory

Default Settings and Troubleshooting

To use the

Reset

• To reboot the switch, press and hold the

seconds.

• To restore the switch configuration to the factory default settings:

1. Disconnect the switch from the network or disable all DHCP servers

on your network.

2. With the power on, press and hold the

10 seconds.

500 Series Stackable Managed Switches

button to reboot or reset the switch, do the following:

Returning the Device

Reset

button for less than 10

Reset

button for more than

for