Cisco Aironet 1240AG Series Snelstarthandleiding - Pagina 18
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco Aironet 1240AG Series. Cisco Aironet 1240AG Series 49 pagina's. 802.11a/b/g access point
Ook voor Cisco Aironet 1240AG Series: Gegevensblad (10 pagina's)
Pagina afdrukken
Note
If your access point is connected to inline power, do not connect the
power module to the access point. Using two power sources on the
access point might cause the access point to shut down to protect
internal components and might cause the switch to shut down the
port to which the access point is connected. If your access point
shuts down, you must remove all power and reconnect only a single
power source.
Obtaining and Assigning an IP Address
To browse to the access point Express Setup page, you must either obtain or
assign the access point IP address using these methods:
Note
The access point does not have a default IP address
•
Assign a static IP address by connecting to its console port and accessing
the access point CLI.
•
Use a DHCP server (if available) to automatically assign an IP address.
You can find out the DHCP-assigned IP address by using one of the
following methods:
18
OL-16714-01