Cisco Aironet 1240AG Series Hızlı Başlangıç Kılavuzu - Sayfa 18
Kablosuz Erişim Noktası Cisco Aironet 1240AG Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco Aironet 1240AG Series 49 sayfaları. 802.11a/b/g access point
Ayrıca Cisco Aironet 1240AG Series için: Veri Sayfası (10 sayfalar)
Sayfayı Yazdır
Note
If your access point is connected to inline power, do not connect the
power module to the access point. Using two power sources on the
access point might cause the access point to shut down to protect
internal components and might cause the switch to shut down the
port to which the access point is connected. If your access point
shuts down, you must remove all power and reconnect only a single
power source.
Obtaining and Assigning an IP Address
To browse to the access point Express Setup page, you must either obtain or
assign the access point IP address using these methods:
Note
The access point does not have a default IP address
•
Assign a static IP address by connecting to its console port and accessing
the access point CLI.
•
Use a DHCP server (if available) to automatically assign an IP address.
You can find out the DHCP-assigned IP address by using one of the
following methods:
18
OL-16714-01