DigitaLinx DL-S41-H2 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DigitaLinx DL-S41-H2. DigitaLinx DL-S41-H2 18 pagina's.
Ook voor DigitaLinx DL-S41-H2: Handleiding voor snelle installatie (8 pagina's), Handleiding voor snelle installatie (8 pagina's)

DL-S41-H2 Owners Manual

Connecting Control

Using the supplied RS232 3.5mm - DB9 serial breakout cable, connect the controller device to the 3.5mm port

on DL-S41-H2 switcher labeled as RS232. Below is a pin out for the supplied breakout cable.

DL-S41-H2

Connect the IR receiver to the IR input port of the DL-S41-H2, the IR remote is used for input switching and

it also can be used to control source and display devices based on CEC control. To use this feature with a

compatible CEC source and display, turn on the CEC option in the source and displays menu options.

Note: CEC performance may differ for various sources and displays and not all remote functions may be

supported by third party source and display manufacturers.

Plug the power supply into the power input port on the rear of the DL-S41-H2 receiver.

Controller or

Device

RXD

TXD

GND