Epson 3880 - Stylus Pro Color Inkjet Printer Netwerkhandleiding - Pagina 35

Blader online of download pdf Netwerkhandleiding voor {categorie_naam} Epson 3880 - Stylus Pro Color Inkjet Printer. Epson 3880 - Stylus Pro Color Inkjet Printer 38 pagina's. Printer
Ook voor Epson 3880 - Stylus Pro Color Inkjet Printer: Brochure (3 pagina's), Specificaties (2 pagina's), Netwerkhandleiding (39 pagina's), Brochure & specificaties (8 pagina's), Start Here (2 pagina's), Start hier Handleiding (6 pagina's), Beperkte garantie (12 pagina's), Handleiding kleurbeheer (47 pagina's), Brochure & specificaties (8 pagina's), Snelstarthandleiding (2 pagina's)

The message "Could not complete communicating configuration data"

appears when you send settings to the network interface.

Cause

This may happen when using a

dial-up router.

Unable to start EpsonNet Config with Web Browser.

Cause

You have not set the IP

address for the network

interface.

The Model Name and IP Address do not appear in the EpsonNet Config dialog

box.

Cause

If a valid IP address is not set,

the items indicated in the

dialog box mentioned above

may not appear.

What to do

Run Command Prompt from the computer on

which EpsonNet Config is installed, and then

enter the following command:

Format: >ROUTE_ADD_the IP address of the

network interface_ the IP address of the

computer (the under bar represents one space)

Example: >ROUTE ADD 192.168.192.168

22.33.44.55.

What to do

Set the IP address for the network interface using

EpsonNet Config or the printer's control panel.

You can check the IP address by printing a

network status sheet, see "Printing a Network

Status Sheet" on page 19.

What to do

Set a valid IP address.

Refresh the status by selecting Refresh from the

View menu.

Increase the length of time before a timeout. To

do this, select Options from the Tool menu, and

then select Timeout. Note that doing so can

cause EpsonNet Config to slowly.

Troubleshooting