Cisco Meraki CW9163E Installatiehandleiding
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco Meraki CW9163E. Cisco Meraki CW9163E 28 pagina's.
Pagina afdrukken
CW9163E Installation Guide
About this Guide
This guide provides instructions on installing and configuring your CW9163E access point. This guide also provides mounting instructions and limited
troubleshooting procedures. For more wireless installation guides, refer to our documentation website's wireless installation guides section.
Product Overview
The Cisco Wireless CW9163E is an outdoor-rated, enterprise-class 802.11ax cloud-managed access point. The AP is equipped with tri-band concurrent radios
geared towards low/medium density applications. It will work with different external antennas for required directivity.
It features 2x2 tri-band traffic radios (2x2 2.4 GHz + 2x2 5 GHz + 2x2 6 GHz), 1x1 tri-band scanning radio, and a 2.4 GHz IoT radio for (BLE/Zigbee/Thread etc).
It also has an inbuilt GNSS receiver for 6 GHz AFC compliance.
Physical Specifications
Dimensions and Weight
Interfaces
•
1x 10/100/1000/2.5G BASE-T Ethernet (RJ45)
•
Four external N-type female antenna connectors
Antennas
•
CW-ANT-O1-NS-00 (Direct Attach Omni Directional Antenna, tri-band)
•
CW-ANT-D1-NS-00 (tri-band Patch, two 2.4 / 5 GHz dual-band ports and Two 5 / 6 GHz ports (Total 4 antenna ports)
•
CW-ANT-GPS2-00 (L1/L5 Dual Band RHCP GNSS antenna (active))
Power
•
802.3at PoE
•
802.3af (degraded performance mode)
•
Injectors Supported:
◦
AIR-PWRINJ6 [30 W rated single-port PoE injector]
◦
AIR-PWRINJ7 [65 W rated single-port PoE injector (802.3bt), mGig Ethernet]
1