Cisco WAP300N Gebruikershandleiding - Pagina 21

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco WAP300N. Cisco WAP300N 30 pagina's.
Ook voor Cisco WAP300N: Handmatig (9 pagina's)

Pagina afdrukken

Linksys WAP300N

How to set up wireless security

CAUTION

While in Wireless Bridge mode, this device can communicate with

other WAP300N devices only if they are also in Wireless Bridge mode

and the wireless settings are all identical

To set up wireless security for your WAP300N in Wireless Bridge mode:

Wireless > Wireless Security

1. Log into the browser-based utility (see "How to open the browser-based

utility" on page 8)

2. Click the Wireless tab, then click the Wireless Security page and select

the Security Mode (WPA2 Personal is recommended for most home

networks )

Depending on the security mode you selected, you may be asked to

enter additional information (see the following table)

Information

Security mode

Required

WPA2 Personal,

Passphrase

WPA Personal

Encryption

WEP

Key 1

3. After you have entered all required information, click Save Settings

Description

Enter the passphrase of 8-63 characters

Select a level of WEP encryption, 40/64-

bit (10 hex digits) or 104/128-bit (26 hex

digits)

Enter the WEP key of your network Key

1 is the transmit key used by this device

Setting Up: Basics