Cisco WAP571E Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco WAP571E. Cisco WAP571E 6 pagina's. Manually connect access points to the network via power over ethernet (poe)
Ook voor Cisco WAP571E: Snelstarthandleiding (17 pagina's), Handmatig (4 pagina's)

Pagina afdrukken
Cisco WAP571E Snelstarthandleiding
Step 8. Connect the other end of the Ethernet cable to the Ethernet port of the PoE switch.
Step 9. Check the lights on both the WAP571E and the PoE switch.
Verify the WAP571/WAP571E with PoE Connection
To verify the hardware installation, follow these instructions:
Check the cable connections.
Check the indicator lights.
Label
Power
LAN
(WAP571)
Activity
Off
Solid (Green)
Solid (Blue)
Flashing (Blue)
Solid (Red)
Off
Solid Green
Flashing Green
Description
The access point is off
The access point is normal; No wireless client is
The access point is normal; at least one wireless
client is connected
The access point is upgrading the firmware.
The access point fails to boot with both firmware
No Ethernet link; FE Ethernet link is active or 10
GE Ethernet link is active.
The access point is transmitting or receiving data.
connected
images.
Mbps.