Cisco WAP571E 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Cisco WAP571E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WAP571E 6 페이지. Manually connect access points to the network via power over ethernet (poe)
Cisco WAP571E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 매뉴얼 (4 페이지)
페이지 인쇄
Step 8. Connect the other end of the Ethernet cable to the Ethernet port of the PoE switch.
Step 9. Check the lights on both the WAP571E and the PoE switch.
Verify the WAP571/WAP571E with PoE Connection
To verify the hardware installation, follow these instructions:
Check the cable connections.
Check the indicator lights.
Label
Power
LAN
(WAP571)
Activity
Off
Solid (Green)
Solid (Blue)
Flashing (Blue)
Solid (Red)
Off
Solid Green
Flashing Green
Description
The access point is off
The access point is normal; No wireless client is
The access point is normal; at least one wireless
client is connected
The access point is upgrading the firmware.
The access point fails to boot with both firmware
No Ethernet link; FE Ethernet link is active or 10
GE Ethernet link is active.
The access point is transmitting or receiving data.
connected
images.
Mbps.