Cisco 500 Series Snel aan de slag - Pagina 3

Blader online of download pdf Snel aan de slag voor {categorie_naam} Cisco 500 Series. Cisco 500 Series 13 pagina's. Stackable managed switches
Ook voor Cisco 500 Series: Handleiding veiligheidsinformatie (42 pagina's), Handmatig (4 pagina's), Snelstarthandleiding (21 pagina's), Gegevensblad (5 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (6 pagina's), Gebruikershandleiding (46 pagina's), Handmatig (40 pagina's), Administratiehandleiding (48 pagina's), Handmatig (24 pagina's), Probleemoplossing en onderhoud (15 pagina's), Snelle referentiehandleiding (7 pagina's), Snelstarthandleiding (25 pagina's)

Cisco WAP551 and WAP561 Wireless-N

Access Point Features

Front Panel

The front panel of the devices consists of three lights: Power, WLAN, and

LAN. For full descriptions of the colors of the lights and their indications,

see

"Verifying the Hardware

A Kensington lock slot is found under the lights.

The back panel of the devices has an RJ-45 Ethernet Port. Use the

Ethernet port to power your device using PoE. It is an auto-sensing,

Gigabit Ethernet (802.3) port used to connect your WAP devices to

network devices, such as computers, routers, or switches. Cisco strongly

recommends using Category 5e or better cable for Gigabit

connectivity.

The side panel of the devices has a Reset button. See

Devices or Returning them to their Factory Default Settings"

information on the Reset button.

Default Settings

Parameter

Username

Password

LAN IP Address

Fallback LAN IP

Subnetwork Mask

If you are using a Cisco Small Business RV Series router, the default range

for the DHCP assigned address is from 192. 1 68. 1 . 1 00 to 192. 1 68. 1 .254. Any

device connecting to the same LAN will be assigned an IP address in this

range.

Cisco Small Business WAP500 Series Wireless Access Point

Installation".

Default Value

cisco

DHCP address assigned

by server

192. 1 68. 1 .245

255.255.255.0

"Rebooting the

for