Cisco 500 Series 빠른 시작 Quide - 페이지 3

{카테고리_이름} Cisco 500 Series에 대한 빠른 시작 Quide을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 13 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 문제 해결 및 유지 관리 (15 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (25 페이지)

Cisco 500 Series 빠른 시작 Quide
Cisco WAP551 and WAP561 Wireless-N
2
Access Point Features

Front Panel

The front panel of the devices consists of three lights: Power, WLAN, and
LAN. For full descriptions of the colors of the lights and their indications,
see
"Verifying the Hardware
A Kensington lock slot is found under the lights.

Back Panel

The back panel of the devices has an RJ-45 Ethernet Port. Use the
Ethernet port to power your device using PoE. It is an auto-sensing,
Gigabit Ethernet (802.3) port used to connect your WAP devices to
network devices, such as computers, routers, or switches. Cisco strongly
recommends using Category 5e or better cable for Gigabit
connectivity.

Side Panel

The side panel of the devices has a Reset button. See
Devices or Returning them to their Factory Default Settings"
information on the Reset button.
Default Settings
Parameter
Username
Password
LAN IP Address
Fallback LAN IP
Subnetwork Mask
If you are using a Cisco Small Business RV Series router, the default range
for the DHCP assigned address is from 192. 1 68. 1 . 1 00 to 192. 1 68. 1 .254. Any
device connecting to the same LAN will be assigned an IP address in this
range.
Cisco Small Business WAP500 Series Wireless Access Point
Installation".
Default Value
cisco
cisco
DHCP address assigned
by server
192. 1 68. 1 .245
255.255.255.0
"Rebooting the
for
3