Cisco 7821 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 7821. Cisco 7821 10 pagina's. Connaught
Ook voor Cisco 7821: Release-opmerkingen (16 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (18 pagina's), Snelle referentiehandleiding (4 pagina's), Snelle referentie (4 pagina's), Snelle installatie en gebruikershandleiding (12 pagina's), Referentiehandleiding (11 pagina's), Snelstarthandleiding (4 pagina's), Handmatig (27 pagina's), Gebruikershandleiding (20 pagina's), Beknopte referentiehandleiding voor werknemers (4 pagina's), Masterhandleiding voor firmwaremigratie (31 pagina's), Handmatig (43 pagina's), Snelstarthandleiding (6 pagina's), Snelle referentiekaart (2 pagina's), Snelstarthandleiding (2 pagina's), Installatiehandleiding (39 pagina's), Handmatig (20 pagina's), Herconfiguratiehandleiding (2 pagina's), Snelstarthandleiding (7 pagina's), Snelle installatiehandleiding (12 pagina's), Gebruikershandleiding (27 pagina's), Gebruikershandleiding (2 pagina's), Aan de slag (2 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (5 pagina's)

Pagina afdrukken
Cisco 7821 Gebruikershandleiding
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: [email protected]
Auto Provisioning
Set to Yes.
MAC Address
Enter Cisco 7821 device MAC address. Example: 0002FDFF1536. MAC address can be
found at the back of the phone.
Click on the Save button.
Creating Extension
Registering Phone
This chapter describes how to register Cisco 7821 device using DHCP, TFTP or HTTP.
The following topics are covered:
- DHCP
- TFTP or HTTP
DHCP
1. Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically instruct devices
with the URL for auto provisioning. For more information refer to your router documentation
or contact your network administrator.
2. Device first boot or user initiated reboot
Auto provisioning process will start during device first boot or after reboot process has been
initiated by user. DHCP server will instruct the device where from to pickup appropriate
configuration file. If everything is done as above described, you should have successfully
registered your device to PBXware.
TFTP or HTTP
1. Login to device web administration interface
Open a new browser window and enter your device IP address in order to access the device
web administration interface login screen. Example: http://192.168.1.22
Click on Admin Login in the top right corner of the administration interface.
Click on Advanced in the top right corner of the administration interface.